How to Remove Air from Water Pipes

Trapped air can be incredibly damaging to your plumbing. If you hear knocking sounds from your faucets or Water Pipes, it could indicate that your plumbing is being invaded by trapped air. Once the air in water pipes is trapped, it can cause a lot of damage by eating away at the insides of your pipes. If you’re hearing a knocking sound coming from your pipes, it’s important to take action. If you don’t address this problem immediately, it can lead to other plumbing problems and even damage your pipes. While it may not seem like an issue, trapped air can wreak havoc on your plumbing. Luckily, you can take a few simple steps to fix your problem.  

Remove Air From Your Pipes in 4 Easy Steps

1. Turn Off Your Main Water Supply
   Once you have turned off your main water supply, you will need to wait for about an hour before continuing. This will give the water in pipes a chance to cool down and return to a normal temperature so it can flow through the system again. All you need to do now is flip the switch that controls your tap, though that may require a bit more work to find. You will discover inside your home a box with a pull-switch-type handle that you need to pull towards you to turn off the water. That is located on the wall of the house adjacent to the tap. It may also have a lever handle on the outside of the building. If your tap does not have a switch, you will need to find an exposed copper pipe within reach of the handle. You will need to stand the pipe up vertically and pull it downwards and away from you to turn off the water.
2. You can turn on your faucets, including your dishwasher and bathtub/shower
   The water should flow from the spigot without any issues at all. If it doesn’t, then your plumbing is most likely clogged. If your tap is still not working after this, there’s likely something stuck in the handle or on the spout. Now that your water flows through every fixture in your home, it’s time to turn on the water in your bathtub/shower. This should have been the last thing you did since it is the most difficult to access. If you are having trouble turning on your bathtub spigot, there may be something behind your bathroom sink. You can now turn on the water in the rest of your fixtures. Your toilet, sinks, showers, and bathtub should be working now. You can also turn on the water in your dishwasher, washing machine, and washing machine drying room (if it’s a part of your home).
3. Now you must flush the toilet just one more time and then shut off the water.
   Flush again to make sure all the water is out of the pipes. At this point, you can open your windows and make sure your house is completely dry. This whole process takes 3-5 hours. Once you have waited for everything to be completely dry, you can turn the water back on and flush the toilet only once. This final flush is important to ensure all the remaining water has been flushed out. Otherwise, you will do it again the next time the water gets turned on. Types of Pipes Used for Drinking Water
4. Once all your water has dried up, you must turn on your main water piping supply and make sure that water starts flowing again.
   You should see a steady stream of running water once again. If this is the case, you can begin to relax. If, on the other hand, there is still a problem, you will need to take extra steps to solve the situation. If the water has flowed consistently for ten minutes or more but has not run clear, note that it is possible that air has been trapped inside your pipes. If this is the case, you should open your faucets a little wider and leave the water in the pipes for another minute. Once you have done this, you should be able to hear the rush of water coming out of the hose filling the pipeline. If this does not happen, you must take additional steps to get the water flowing again. If the water does not appear as clean and clear as before, you must flush all your pipes out again. This should get rid of any remaining air that might still be in your pipes. Once this is done, you can turn on your main water supply again. If the problem persists again and again, you can contact an experienced plumber.

Conclusion –

Air in water pipes can be detrimental to the longevity of your plumbing system. The air pipe in water tank can also lead to water loss due to siphoning. Air bubbles form when water passes through a clogged pipe, and the pressure exerted by the expanding bubbles forces the water to flow out of the pipe. This can be especially problematic for low-pressure systems like faucets. TOPLINE Industries pipes are specifically designed to help prevent air trapping problems. With a strong focus on innovation and responsiveness, we are constantly exploring new and emerging opportunities to serve your business needs better.