Top Plumbing Mistakes You Need To Avoid

If you don’t have a bad plumbing system, then there’s no need to fix it. The problem with this is that it can eventually lead to all sorts of plumbing problems including leaks and drips. If you don’t monitor them, then they’ll eventually become major problems that you’ll need professional help to fix. So how do you avoid these kinds of plumbing mistakes? It’s important to firstly know what types of pipes and connections there are. This will help you to choose the most appropriate parts for your situation and the most efficient ways of fixing the issues. Let us first understand the home plumbing system and its important parts. 


Plumbing system at home

There are three parts at home plumbing. 

  1. A Water supply system is vital for any home. When it comes to the bathroom, toilet, kitchen and other areas in the house, choosing the right water supply system is imperative. The most important change that is happening in the trend of water supply system is the introduction of direct water supply systems. In this type of system, a house gets connected with the municipal water supply network through a water tank, pump and pressure regulator. This system is not only more economical and sustainable, but it also significantly reduces the water consumption. After all, every drop of water we use is precious. Although this type of systems is not common in all states of India yet, but it will be more common in future. This is also a major step towards increasing access to water which is a huge problem in many developing countries.
  2. Fixtures and appliances are essential because they protect your plumbing system from leaks, corrosion, and other damage. Fixtures can include faucets, showerheads, toilets, sinks, and windows. Appliances or fixtures can include garbage disposals, dishwashers, heating systems, and air conditioners. When these items are installed correctly and maintained properly, they can help keep your home comfortable and secure. If you have any questions about your plumbing system or the condition of your fixtures and appliances, contact a professional plumber. They can inspect your plumbing home system and provide recommendations for maintaining it properly.
  3. Waste water disposal is a part of your residential plumbing system that ensures that human waste is properly treated and disposed of. Without waste water disposal, untreated human waste can end up in lakes, streams, and other bodies of water, where it can cause health problems (like contamination) for both humans and animals. It’s important to have a functioning waste water disposal system in place to keep your home and the environment safe. When properly installed and maintained, a drainage and waste water disposal system can help to prevent expensive problems such as clogged drains, backed up toilets and flooding. It is important to maintain your drainage and waste water disposal system regularly to ensure it is working effectively. This includes regular cleaning, inspects and flushing your pipes when necessary.

Topline Industries is one of the most trusted and reliable manufacturers of plumbing pipes in India. The company has a huge clientele. This is because of its high-quality products and prompt delivery of orders. You can also visit the company website to know more about the products. 




  1. Over tightening plumbing fixtures can damage the fittings and cause them to become loose. Over tightening also increases the chances of leaks, including those caused by corrosion. This is because constant pressure on fittings causes them to erode. Corrosion can weaken the pipe and allow it to break. With a leaking toilet, you may need to call in a plumber to fix the leak. Alternatively, if you suspect that your toilet is over tightened, check it regularly and replace any fittings that have corroded or broken. If you notice any degradation in the toilet’s rubber seal at this time, there is a chance that your toilet may be leaking.
  2. There are many reasons why using inappropriate tape can lead to plumbing problems. In most instances, the problem is caused by a leak between the pipe and the wall that needs to be sealed. If water is staging back into the home, the tape may be keeping the water from leaking out again. Another common cause of plumbing problems is when you wrap a thread tape around the pipe twice, or when you use too much tape. Doing so causes a kink in the pipe that reduces efficiency and can cause more expensive problems down the road. This could cause damage to your flooring and other surfaces inside your home.
  3. One of the most common mistakes that homeowners make when it comes to plumbing is using drain line cleaners. These cleaners are often used to unclog drains, but in reality, they can cause more damage than they are good for. For example, drain cleaners can leave behind calcium deposits and other mineral deposits that can lead to clogs and other problems. They may also corrode pipes and damage them over time. So, if you are looking to clean your pipes, you should instead opt for a pipe cleaner or other cleaning method that does not use drain line cleaners. By doing so, you will be able to avoid potential problems while also ensuring that your drains stay clean and clear.
  4. There are a lot of parts that are necessary in order to handle plumbing jobs properly, including everything from faucets and drains to pipes and valves. One of the biggest mistakes that people make when it comes to plumbing is not having back-up parts on hand. So, when it comes to plumbing or any other repair work, you should always ensure that you have all the necessary spare parts ready in case something goes wrong. But if you’re not careful, you might miss a crucial part or two along the way, leading to delays and frustrations for everyone involved. So the next time you get a call about a plumbing problem, ensure you have all the tools and supplies you need to get the job done right the first time around.
  5. One of the most common plumbing mistakes that homeowners make is not turning off the water after washing their hands or taking a shower. This is because if your faucet or shower remains on, it will run continuously, which means that there will be a lot of pressure pushing against the pipes in your home. The pressure can damage the pipes, and this could lead to serious problems down the road. So, if you have time at the end of the day, make sure that you shut off your faucet before you leave.

Conclusion –

Fixing plumbing issues is not rocket science. It is really not that difficult if you know what you are doing.Topline Industries is one of the most trusted and dependable manufacturers of plumbing pipes in India. Topline Industries has a modern manufacturing facility and a well-equipped testing laboratory, which detects any type of defect present in the product.  They have an experienced team of engineers and managers who oversee every step of production to deliver the highest quality products. They provide products at affordable prices and in firm, sealed packaging free of any defects. If you are looking for PVC plumbing solutions for your applications and you want a better deal, place an order with them. 



Enquire Now