4 Facts You Never Knew About Agri Irrigation Pipes

Agriculture is the principal source of revenue for 58% of the Indian people. Irrigation, like fertilization, pest management, drainage, and soil quality, is an important aspect of agriculture. A well-functioning agriculture sector relies on equipment and infrastructure, of which agricultural irrigation pipe fittings are a vital component. 

What are irrigation pipes? 

Irrigation pipes and fittings are particularly built for varying pressure and gravity flow uses in irrigation and agricultural water delivery. 

4 Facts About Agriculture Irrigation Pipes

1. What are the different types of irrigation piping?

  Irrigation pipes can be used in big and small-scale projects, such as interior and exterior water delivery. The type of irrigation system used by a farm is determined by factors like the grade, or inclination, of the land, the porosity of the soil, and, of course, the cost. 

  Flood irrigation, for example, uses pipes or elevated earth boundaries to direct water down a slope. Sprinkler irrigation, on the other hand, distributes water across wide areas of a field. Sprinklers can be connected to fixed or movable irrigation pipes, as well as reeled hoses. 

  Drip irrigation uses small-diameter tubing, either above or below ground, that is marked with emitters. Emitters are just valves through which water flow is controlled. A drip irrigation belt sends water to crop roots via drippers or capillary tubes connected by plastic pipes. It’s mostly the drip irrigation tape that comes in at the outflow opening and drops water near the crop roots. These belts are classified as drip irrigation belts, labyrinth irrigation belts, and other types. The narrowest irrigation pipe is known as drip tape, and it is typically used to irrigate vegetable crops but has also been used to irrigate cereals. 

2. Irrigation pipe materials

  A variety of factors influence the materials used for on-farm irrigation piping. What is the material’s resistance to solar radiation? How much high temperature can it endure? What amounts of acidity or alkalinity put it under stress? What is the pressure capacity? What kinds of earth loads can below-ground pipelines withstand? These and other concerns should be addressed before deciding on the best irrigation material. 

  A diverse spectrum of materials, including plastics, metals, composites, and ceramics, are used as the constituent elements of pipe. Polyethylene, polyvinyl chloride, and PVC pipes with steel wire frames are three of the most commonly chosen materials. Polyethylene piping, sometimes known as “black roll pipe,” is available in 300-foot rolls and is frequently regarded as more difficult to install. 

  PVC pipes, on the other hand, are the most widely utilized and best-rated irrigation piping in the world. PVC pipe is quite durable. It is known for its strength and endurance. It is capable of withstanding pressure and unexpected weight. Similarly, given the right conditions, it may last for more than 100 years without being replaced. Second, PVC irrigation pipe is inexpensive. It is less expensive than a metal pipe. Finally, PVC pipes come in a range of shapes and sizes. 

3. What is the ideal irrigation pipe size?

  Irrigation pipe is available in a wide range of sizes, thicknesses, and lengths. The appropriate dimensions for contemporary and intensive agriculture are heavily influenced by the farm’s size and the amount of water required. A large-diameter pipe must be utilized to divert water in and out if it is irrigating tens of thousands of acres. 

  The size is also determined by the ground conditions and the function for which it is installed. Pipes installed in consistently graded furrows, for example, will not need to be as thick as those installed on sloping surfaces where swells may occur. The diameter chosen is determined by the amount of water and water pressure expected to flow through it. A 12-inch diameter is sufficient for 1,000 gallons of water to travel through the agricultural irrigation pipe each minute. More than that may require 15 or even 18 inches. In summary, farm by farm, the optimum pipes for agriculture must be identified. 

4. Farming and agriculture irrigation pipe and their applications

  Piping is utilized in a wide range of agricultural applications. These include irrigation pipes, UV pivot pipes, above-ground flowline pipes, well shrouds, and so on. Here are two intriguing agricultural initiatives that use pipes. 

1. Deep Garden Irrigation –

   This irrigation is extremely useful for planting trees, as well as for huge plants, to provide sufficient water in the deep root zone. This allows trees and plants to get more water and grow deeper roots underground, allowing them to survive droughts better.

     

2. Farmland Irrigation –

   Most nations still utilize earth canal irrigation for farms, and water waste is a major issue. A substantial percentage of arable land is not effectively watered due to a shortage of water, and crop yields are extremely low. Using an agricultural irrigation pipe for farmland irrigation may save up to 50% of water while increasing productivity. Why should farmers use agriculture PVC pipe?

Conclusion:

Choosing the right irrigation pipe for agriculture can be difficult since you need proper assistance as well as understanding. An agricultural irrigation system is critical to the success of any farm. Because of its linking role, the pipe is the most crucial system component. The irrigation system will only function properly if the best agricultural piping is used. 
 
Farmers who need to maintain essential moisture levels in their fields benefit from agricultural pipes. Agricultural pipes are available in a variety of sizes, allowing people to adjust their irrigation supply to their specific needs and business objectives. A well-run farm requires an adequate supply of fittings and pipes. An incorrect setup might cause complications and cost a lot of money. Make sure you choose high-quality agricultural irrigation pipe fittings from reputable agricultural water pipe makers like Topline Industries so that your farming activities may benefit from them. 

FAQ:  
 
1. What makes up an agricultural piping network? 
 
There is more to irrigation than pipes. A farm irrigation system is made up of several parts, including the water supply, filter, pump, pressure regulator, and so on. The agricultural piping links all of the components to properly distribute water and nutrients to the crops. 
 
2. What types of pipes are utilized in agriculture? 
 
RPVC pipes, CPVC pipes, column pipes, borewell casing pipes, galvanized iron pipes, HDPE pipes, and suction pipes are examples of agricultural pipes.